Phidgets USB Interfaces |
|
|
Phidget Interface Kit 0/0/4 Relay Output #1014 US$ 65.00
The PhidgetInterfaceKit 0/0/4 Provides a convenient way to interface your PC with various higher-voltage devices such as incandescent bulbs, high-power relays, and motors.
The 1014 contains 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT).
|
|
Phidget Linear Touch (1015) US$ 65.00
Use your finger anywhere on this linear touch sensor. This device is an interface kit that will output one Analog channel and two Digital channels. The Analog value represents the position on the bar, one Digital value indicates flastouch, and the other Digital value indicates proximity.
|
|
Phidgets Circular Touch #1016 US$ 65.00
Use your finger anywhere on this circular touch sensor. This device is an interface kit that will output one Analog channel and two Digital channels. The Analog value represents the position on the circle, one Digital value indicates touch, and the other Digital value indicates proximity.
|
|
Phidgets Interface Kit 0/0/8 #1017 US$ 100.00
The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 65 Watts. It is typically used for switching small signals, as opposed to high current applications. For high current applications see 1014 PhidgetInterfaceKit 0/0/4.
|
|
|
Phidget RFID #1023 US$ 70.00
PhidgetRFID reads RFID tags that are brought in close proximity, within 3 inches. Includes USB cable but not tags. We recommend that you purchase the PhidgetRFID Kit (Item#2002), as it comes with an assortment of tags, at a slight discount.
|
|
PhidgetLED-64 (1030) US$ 120.00
PhidgetLED-64 controls upto 64 LEDs independently. On/Off and Brightness.
A USB cable and 16 Double Ended cables are included (cut these in half and solder cut end to LED). A 6VDC to 12VDC power supply, center positive polarity is required to power this device, must be purchased seperately.
|
|
|
Phidget Encoder #1052 US$ 50.00
A USB mechanical rotary encoder. Measures 20 counts per revolution, and has a push button on the shaft. This type of encoder is typically used for human interface, not measuring the speed of motors and pulleys.
|
|
|
Phidget Encoder High Speed (1057) US$ 65.00
The PhidgetEncoder HighSpeed has been designed to work with a wide assortment of optical encoders. It can handle up to 500,000 counts per second and can be connected to any incremental quadrature encoder.
|
|
|
Phidget Accelerometer 3-Axis #1059 US$ 115.00
The PhidgetAccelerometer 3-Axis is a three axis accelerometer that measures ±3 gravities (± 29.4m/s2) change per axis. It measures both dynamic acceleration (vibration) and static acceleration (gravity or tilt).
|
|
Phidget Motor Control LV #1060 US$ 80.00
The PhidgetMotorControl LV allows you to control the direction, velocity and acceleration of up to two standard DC motors. Input voltage from 5-9 VDC with a maximum current of 1.5Amps per motor. Over current error is given in software API when motor exceeds limit. Packaged with USB cable, and manual.
|
|
Phidgets IR Distance Sensor US$ 19.00
IR Distance Sensor is an adapter to interface the Sharp GP2D12 to the PhidgetInterfaceKit 8/8/8. The GP2D12 measures distances from 70 cm to 10 cm producing a voltage from 0 to 2.5V. This is interpreted as a sensor value of 0 to approximately 500 on the 8/8/8.
- 60cm sensor cable included
- 30cm GP2D12 cable included
- GP2D12 Not included
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidget IR Reflective Sensor 5mm 4-Pack #1102 US$ 45.00
Based on the QRB1114 this sensor can detect an object at 5mm. It can be used to determine the difference between black (low reflective conditions) and white (high reflective conditions).
Board Dimensions: 3.0 x 3.8 cm
Mounting Holes: 2.3 x 3.0 cm
|
|
Phidgets IR Reflective Sensor 10cm US$ 28.00
This sensor can detect the presence of a highly reflective object at 10cm, for less reflective objects (like hands) the distance is about 5cm.
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
|
Phidgets Force Sensors 4-Pack #1106 US$ 52.00
4 Phidgets Force Sensors. Force Sensor, is intended as an input device. It is not accurate enough to be used as a weight measurement device. 60cm sensor cable included..
Board Dimensions: 2.8 x 3.0 cm
Mounting Holes: 2.0 x 2.3 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidget Magnetic Sensor 4-Pack #1108 US$ 52.00
4 Linear Hall Effect Sensors. This ratiometric Hall-effect sensor provides a voltage output that is proportional to the applied magnetic field. Includes 60cm sensor cable.
Board Dimensions: 3.0 x 3.0 cm
Mounting Holes: 2.3 x 2.3 cm
|
|
|
Phidgets Touch Sensor 4-Pack #1110 US$ 52.00
Capacitive touch sensor, detects a touch through plastic, glass, paper. 60cm sensor cable included.
Board Dimensions: 3.0 x 3.8 cm
Mounting Holes: 2.3 x 3.0 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidgets Infrared Motion Sensor #1111 US$ 60.00
This sensor detects changes in infrared radiation which occur when there is movement by a person (or object) which is different in temperature from the surroundings. As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature. The sensor is also characterized by a narrow sensing area.
|
|
Phidgets 60mm Sliders 4-Pack #1112 US$ 52.00
4 60mm Sliders, this is a linear potentiometer (variable resistor). Comes with 60cm sensor cable.
Board Dimensions: 3.0 x 9.1 cm
Mounting Holes: 2.3 x 6.8 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidgets Mini Joy Stick Sensor #1113 US$ 19.00
Mini Joy Stick Sensor, Two axis joystick with momentary switch. Comes with 2 60cm cables.
Board Dimensions: 5.1 x 3.0 cm
Mounting Holes: 3.0 x 2.3 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidgets Temperature Sensor 4-Pack #1114 US$ 45.00
Temperature sensor for the Phidget Interface Kit 8/8/8. With a range of -40 to +125 degrees Celsius. 60cm sensor cable included.
Based on the Microchip TC1047A this board provides 0.2V to 3.4V DC signal.
Board Dimensions: 3.0 x 2.8 cm
Mounting Holes: 2.3 x 2.0 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidgets Pressure Sensor #1115 US$ 60.00
Measure gas pressure from 20 to 250 kPa (2.9 to 36.3 psi). Originally designed for the auto industry this silicon pressure sensor can be used in a variety of applications. Include 60cm sensor cable.
Board Dimensions: 3.0 x 3.3 cm
Mounting Holes: 2.3 x 2.5 cm
|
|
Phidget Multi-turn Rotation Sensor #1116 US$ 42.00
This rotation sensor can be turned 10 full rotations. Includes 60cm sensor cable.
Board Dimensions: 3.0 x 4.8 cm
Mounting Holes: 2.3 x 3.0 cm
Height: 2.5 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidget Voltage Sensor #1117 US$ 30.00
Measure DC voltages from -30 to +30 Volts. Includes 60cm sensor cable.
Board Dimensions: 3.0 x 3.8 cm
Mounting Holes: 2.3 x 2.5 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
Phidgets 50Amp Current Sensor AC/DC #1118 US$ 83.00
Measure DC Current from -50 to +50 Amps. Includes 60cm sensor cable.
Board Dimensions: 3.5 x 6.0 cm
Mounting Holes: 2.8 x 5.3 cm
This sensor is intended to be used with a PhidgetInterfaceKit - Analog input
|
|
|
Phidgets Voltage Divider 1121 US$ 15.00
The Voltage Divider eliminates the need to connect a resistor to an analog input by putting a high precision potentiometer on the board to allow the adjustment of the fixed resistor. The interface to the variable resistance sensor is a convenient terminal block.
|
|
|
|
|
Phidgets Humidity/Temperature Sensor #1125 US$ 60.00
Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH.
Measures Ambient Temperature in the range of -40°C to +100° C with a typical error of ±0.75°C in the 0°C to 100°C range.
Includes two 60cm sensor cables
|
|
|
Phidgets Precision Light Sensor #1127 US$ 20.00
The Precision Light Sensor measures human perceptible light level in lux; its measurement range is from 1 lux (Moonlight) to 1000 lux (TV studio lighting)
Comes packaged with a 60cm sensor cable.
|
|
Phidgets Sonar Sensor #1128 US$ 33.00
The Sonar Sensor is a compact high performance ultrasonic rangefinder that can detect objects at a distance of 6 to 254 inches (6.45 m) with a 1 inch resolution. The sensor automatically calibrates itself when powered up.
Comes packaged with a 60cm Sensor Cable that must be soldered to the sensor board.
|
|
|
|
|
Phidgets Advanced Servo Kit 4-Motor #2010 US$ 165.00
PhidgetAdvancedServo Kit 4-Motor – Everything you need to control 4 servo motors from your PC, with the ability to add another 4 RC servos of your choosing.
Note: Make sure you select the right power supply: North Amarican (US), European (EU), British (UK), or Australia (AU). Ships standard with (US) power supply, please let us know if you need one of the other power supplies in the comments field of your order.
|
|
|
|
|
|
|
Phidget LV Motor Kit (2007) US$ 140.00
Control two DC motors, forward, reverse and speed control. This kit comes packaged with everything you need to get started:
- PhidgetMotorControlLV
- 2 DC Motors (servo case)
- 2 Wheels 2 5/8in (color may vary)
- USB cable
- A 6 Volt, 2.3 Amp power supply
|
|
Phidget IR Distance Sensor Kit #2008 US$ 35.00
IR Distance Sensor Kit interfaces the Sharp GP2D12 to the PhidgetInterfaceKit 8/8/8. The GP2D12 measures distances from 70 cm to 10 cm producing a voltage from 0 to 2.5V. This is interpreted as a sensor value of 0 to approximately 500 on the 8/8/8.
|
|
|
|
|
|
|
Phidgets Dual Relay Board #3051 US$ 35.00
The Dual Relay Board is an accessory to the PhidgetInterfaceKit 8/8/8. Each relay is controlled by a seperate Digital Output, and can control open or close a circuit up to 250 volts at 10 amps AC or 100 volts at 5 amps DC. The relay board does require power connection from one analog input, and so reduces the number of available analog inputs.
Board Dimensions: 5.3 x 4.5 cm
Mounting Holes: 4.6 x 3.8 cm
|
|
Phidget 1-Motor PhidgetServo #1000 US$ 45.00
Phidget Interface Kit 0/16/16 Digital Input/Output #1012 US$ 100.00
PhidgetInterfaceKit 8/8/8 #1018 US$ 90.00
Phidget Temperature Sensor - Thermocouple input #1051 US$ 60.00
Phidget Dual Axis Accelerometer #1053 US$ 75.00
Phidget Ph Sensor (1058) US$ 100.00
Phidget Vibration Sensor 4-Pack #1104 US$ 52.00
Phidgets Rotation Sensors 4-Pack #1109 US$ 45.00
Phidgets 20Amp Current Sensor AC&DC #1119 US$ 30.00
Phidgets 30 Amp Current Sensor AC/DC #1122 US$ 34.00
Phidgets Precision Voltage Sensor (1123) US$ 45.00
Phidgets Precision Temperature Sensor #1124 US$ 17.00
Phidgets Differential Gas Pressure Sensor #1126 US$ 46.00
Phidget Text LCD 20x2 : Blue : Integrated 8/8/8 InterfaceKit US$ 139.00
Phidget Text LCD 20X2 : White : Integrated 8/8/8 Interface Kit US$ 139.00
Phidgets 1-Motor PhidgetServo Kit #2000 US$ 60.00
Phidget Radio ID RFID Kit #2002 US$ 100.00
Phidgets Starter Kit #1 2003 US$ 290.00
Phidgets Starter Kit #2 2004 US$ 550.00
Phidgets Interface Kit Package #1 2005 US$ 150.00
Phidgets Interface Kit Package #2 2006 US$ 250.00
Phidget Intro Kit #1 (2009) US$ 320.00
Phidgets RFID Tag - 30mm Disc #3007 4-Pack US$ 28.00
Phidgets RFID Tag - Credit Card Sized #3008 4-Pack US$ 28.00
Phidgets RFID Tag - Key Fob #3009 4-Pack US$ 28.00
Phidgets K-Type Thermocouple #3015 US$ 40.00